• 25% Sale
ORRA LED Face Mask
  • 25% Sale
ORRA LED Face Mask
ORRA LED Face Mask

ORRA LED Face Mask

⭐⭐⭐⭐⭐ 4.9/5 · 11 reviews

Advanced LED light therapy for brighter and smoother-looking skin

✓ Red + NIR, blue and yellow light
✓ 216 LED sources for even coverage
✓ Just 10 minutes per treatment
✓ Ultra-lightweight – only 120 g.

€219,00 €295,00
€219,00

🚚 Free shipping · 🛡 2-year warranty

Aprašymas

ORRA uses LED light of different wavelengths focused on different skin care needs. Light therapy helps maintain:
- brighter and more even skin;
- a feeling of firmer skin;
- smoother skin texture;
- less noticeable fine lines;
- healthier and naturally glowing skin.
Technology that becomes part of your daily life.
ORRA is designed for consistent use. Even light distribution helps ensure a uniform LED therapy effect during use, and the convenient design makes it easy to integrate the procedure into your daily routine.
WHAT MAKES THE ORRA LED MASK STAND OUT?
HIGHEST COMFORT AND ADAPTABILITY
- Weighs only ~120 g: Extremely lightweight and compact design ensures complete comfort during the procedure, allowing you to easily take the mask even when traveling.
- Flexible silicone: Soft, face-contouring material helps the mask fit comfortably and securely.
- Cordless use: Freedom to move – easily integrate LED therapy into your daily routine without being tied to a power outlet.
- IPX7 water resistance: Ensures extremely simple and hygienic device maintenance after each use.*
ADVANCED LED TECHNOLOGY AND PERSONALIZED CARE
- 216 LED light sources: 70 light matrices guarantee perfectly even light distribution over the entire covered facial area.
- 3 light modes: Red + NIR, blue, and yellow light allow for targeted solutions to specific skin needs.
- 3 intensity levels: Choose low, medium, or high level for complete comfort.
- Adjustable timer: Set a 10, 15, or 20-minute procedure – the mask will turn off automatically when the time is up.
*Note: Do not use the ORRA LED mask in the bath, shower, pool, or while in water. Do not use the device near water where there is a risk of it falling in. IPX7 protection class makes cleaning easier, but does not mean that the device is intended for use submerged in water. Always follow maintenance instructions.
HOW DOES ORRA LED LIGHT TECHNOLOGY WORK?
The ORRA LED mask uses LEDs of different wavelengths designed to specifically address various skin problems. The device has 3 integrated modes combining red, blue, yellow, and near-infrared (NIR) light.
LIGHT SPECTRUM AND ITS EFFECT
🔴 Red Light (660 nm)
For mature, tired skin. Supports firmness, elasticity, and smooths skin appearance.
◉ Infrared Light / NIR (850 nm)
Invisible light that acts in the deepest layers. Used in conjunction with other modes.
🔵 Blue Light (460 nm)
For combination, oily, and blemish-prone skin. Helps maintain cleanliness and freshness.
🟡 Yellow Light (590 nm)
Gentle mode for sensitive and reddened skin. Provides comfort, radiance, and evens out tone.
LED light therapy is an excellent addition to daily cosmetic care, helping to maintain healthy, glowing, and well-groomed skin.

Naudojimas

The ORRA LED face mask is designed for cosmetic facial skin care at home. Use the device only according to the recommendations and manufacturer's instructions provided.
HOW TO USE ORRA?
Before the procedure, thoroughly cleanse and dry your face – always perform the therapy on clean and dry skin. The device is conveniently controlled by a remote control, allowing you to select:
- Light mode: Red + NIR | Blue | Yellow
- Light intensity: Low | Medium | High
- Treatment duration: 10, 15, or 20 minutes (the device switches off automatically when the time expires).
STEP BY STEP
1. Cleanse your skin – thoroughly wash and dry your face.
2. Put on the mask – comfortably fit the ORRA to your face so that it sits securely.
3. Turn on the control – switch on the remote control.
4. Select the light mode – choose the most suitable color according to your skin's needs.
5. Select the intensity – choose a low, medium, or high level.
6. Set the duration – select a time from 10 to 20 minutes.
7. Relax – enjoy the procedure until the device automatically switches off.
8. Finish your routine – after therapy, use your usual facial care products (toner, serum, cream, or SPF).
RECOMMENDED USAGE FREQUENCY
Use 3–5 times per week.
IMPORTANT: Consistency is key to LED therapy results – regularity provides much more benefit than a single, long procedure.
WHO IS THE ORRA LED FACE MASK NOT RECOMMENDED FOR?
The ORRA LED light therapy mask is not for everyone. Before first use, we recommend familiarizing yourself with the instructions for use and assessing whether light therapy is suitable for you.
Do not use ORRA if:
- you are pregnant or breastfeeding;
- the skin at the treatment area is damaged, has open wounds, severe irritation, or infection;
- you have increased light sensitivity or have been diagnosed with photosensitization;
- you are taking medications or using cosmetic products that may increase skin sensitivity to light;
- you suffer from epilepsy or have another condition for which flashing or intense light may be inadvisable;
- you have an implanted medical device, such as a pacemaker, and your doctor has not confirmed that the device is safe to use;
- you have other health conditions for which light therapy may be inadvisable.
If you are unsure whether ORRA is suitable for you, consult a doctor or other qualified healthcare professional before use.
IMPORTANT
ORRA is intended for cosmetic skin care. It is not a medical device and is not intended to diagnose, treat, or cure diseases.
Read the entire instruction manual carefully before first use. Do not use the mask while it is charging and keep it out of reach of children.
Use only as directed in the instruction manual.
HOW TO CARE FOR ORRA?
DAILY CARE AFTER EACH USE
1. Disconnect the controller – turn off the device and disconnect the remote control from the mask.
2. Wipe the surface – gently wipe the inside of the mask with a soft, damp cloth or 99.9% water content wet wipes.
3. Dry – after cleaning, gently dry the mask with a paper towel and leave it to air dry naturally.
4. Store safely – store the device or reuse it only after it has completely dried.
DISINFECTION (FOR ACNE-PRONE SKIN)
If you use the mask on acne-prone or breakout-prone skin, you can clean it with 70% isopropyl alcohol wipes.
⚠️ Important: Do not use alcohol wipes with a concentration stronger than 70%.
IMPORTANT WARNINGS
🚫 Never spray liquids directly onto the mask.
🚫 Do not immerse the device in water or wash it under running water.
🚫 Do not use abrasive cleaners or aggressive chemical agents.

Specifikacija

Dimensions: 220*210*4 mm
Weight: ~120g
Input: DC 5V / 1A
Power: 3.8W
Battery capacity: 3000 mAh
Designed to meet international safety and compliance requirements
CE · RoHS · FCC · UKCA
Waterproof rating: IPX7

Kas įeina į rinkinį

- 1 ORRA silicone LED face mask
- 1 remote control
- 1 charging cable
- 1 user manual

Pristatymas

We deliver by OMNIVA, LP express parcel lockers within 1-2 business days across Lithuania for FREE.

Why choose ORRA?

  • 216 LED sources
    for even coverage
  • 3 light modes
    Red + NIR · Blue · Yellow
  • only 120 g.
    lightweight and comfortable
  • 15 minutes
    for your daily skincare routine

Clients say

"After a few weeks of use, skin appears brighter."

E

Eglė M.

Confirmed buyer

"Amazing results in just two weeks! My skin feels rejuvenated and glowing."

E

Emily Chen

Patvirtintas klientas

"Labai džiaugiuosi savo odos išvaizda! Ji atrodo skaistesnė, lygesnė, o veido spalva daug tolygesnė."

E

Eglė M.

Patvirtintas pirkėjas

"Ilgai dvejojau, ar pirkti, bet dabar tikrai nesigailiu. Oda atrodo gaivesnė, labiau švytinti, o pats naudojimas labai malonus. Tikrai rekomenduoju! Verta kiekvieno išleisto euro."

L

L.K.

Patvirtintas pirkėjas

"Labiausiai džiaugiuosi, kad veidas atrodo gaivesnis, o oda stangresnė ir tolygesnės spalvos. Pats masažas toks malonus, kad kiekvieną vakarą laukiu tų kelių minučių sau."

A

Anonimas

Patvirtintas pirkėjas

FAQs

The ORRA LED mask uses 3 different light modes, each designed for different skin needs:

Red + near-infrared light (660 + 850 nm) – intended for mature skin care. These wavelengths penetrate deeper and are the most widely studied in photobiomodulation. Helps maintain collagen production, skin firmness and elasticity, and reduces the visibility of fine lines.

Blue light (460 nm) – intended for acne-prone skin care. 460 nm blue light works on the skin surface and is used for its effect on acne-related bacteria.

Yellow light (590 nm) – intended for dull, unevenly toned, or redness-prone skin care. The effect of yellow light on the skin is less studied than red and near-infrared light, but studies show its potential for skin appearance and redness-related processes.

In short: red + NIR – for firmness and signs of aging, blue – for acne-prone skin, yellow – for skin tone and reduction of redness.

The results of LED light therapy depend on the skin condition, the chosen mode, and the regularity of use. The first changes in skin appearance can be noticed after several weeks of consistent use, and for more significant results, regular use over a longer period is recommended.

The ORRA LED mask is designed as part of a long-term skincare routine, so consistency, rather than one-off treatments, is key.

The ORRA LED mask is recommended for use 3–5 times a week, choosing the light mode suitable for your skin's needs.

Regular use is more important than long procedures. LED light therapy works gradually, so the best results can be expected by consistently incorporating the mask into your daily skincare routine.

No. A higher number of LEDs does not automatically mean a more effective LED mask.

When evaluating and comparing LED face masks, it is important to consider not only the number of LEDs, but also the wavelengths of light used, light intensity, LED arrangement, uniformity of light distribution, and how well the mask fits the face.

The ORRA mask uses 216 LED light sources, arranged to distribute light across the entire face area. The mask has three targeted light modes: red and near-infrared light (660 + 850 nm), blue light (460 nm), and yellow light (590 nm).

Therefore, when choosing an LED mask, we recommend evaluating the entire technology as a whole, rather than just the highest number of LEDs.

Yes. LED light therapy is non-invasive – the skin is not mechanically damaged during the procedure, and no acids or other active cosmetic ingredients are used.

However, the sensitivity of each person's skin is individual. If the skin is extremely sensitive, photosensitising medications are being used, there are skin diseases or increased light sensitivity, it is recommended to consult a doctor or dermatologist before using an LED mask.

When using ORRA for the first time, we recommend starting with a shorter procedure and observing your individual skin reaction.

Use the ORRA LED mask on clean, dry skin. Before the procedure, remove make-up, creams, serums and other products.

After the LED light therapy, you can continue your usual skincare routine and use a serum, cream or other products suitable for your skin.

Recommended sequence: skin cleansing → completely dry skin → ORRA LED mask → regular skincare products.

ORRA was developed focusing not on the highest possible number of LEDs, but on the most important parameters of LED light therapy – precisely selected wavelengths, even light distribution, and a good fit of the mask to the face.

The mask uses 216 LED light sources and 3 targeted modes: red + near-infrared light (660 + 850 nm), blue (460 nm), and yellow (590 nm). This allows you to choose a mode according to different skin needs.

ORRA is also flexible and extremely lightweight (~120 g), so it fits comfortably on the face and is designed for regular home use.

When choosing an LED mask, it's worth comparing more than just the number of LEDs. Light wavelength, intensity, session duration, and its distribution are important photobiomodulation parameters.